产品
Rack Mounted 收发器/中继器s - VHF / UHF (12-49-0000)
The 12-49 series of 19" x 1U rack mountable repeaters are available as VHF or UHF units with user-programmable power outputs ranging from 50 milliwatts to 5 watts.
By adding a power amplifier within the 1U rack the unit becomes a powerful 25W output store & 转发寻呼中继器.
Available Protocols: Salcom, 开发/宠物, TNPP, 载荷适配器.4.4.4, Ascom, 游戏, Austco, Match, Gent, GPS & 脉冲计数, SMS, Scope, Comp1, Comp2 & 游戏
Salcom has further developed its range of rack systems in order to provide off-the-shelf 1U 19 inch solutions for paging and telemetry.
These racks provide a conveniently packaged selection of standard Salcom core products that can easily be added to your server rack.
The 12-49 series of transceivers/repeaters are available as VHF or UHF units with user-programmable power outputs ranging from 50 milliwatts to 5 watts, with 25W output also being a configurable option when a power amplifier is also added.
They are capable of operating as NRZ or POCSAG transmitters. The built-in POCSAG encoder can be enabled or disabled as required.
In addition to a direct/RS232 buffered serial port, an on-board USB端口 enhances the range of applications to which the transmitter can be applied. Input/Output expansion is also possible via an internal.
The USB and RS232 ports can be used to initiate paging transmissions using the Salcom proprietary protocol, 开发/宠物, TNPP, 载荷适配器.4.4.4, Ascom, Austco, Match, Gent, GPS & 脉冲计数, SMS, Scope, Comp1, Comp2 & 游戏. These ports can be used concurrently making it possible to connect a telephone interface unit and still initiate paging transmissions via the USB端口.
四个离散输入 are supported which may be used to initiate relay commands for remote control applications.
For paging applications a different pre-programmed message can be assigned to an input on high and/or low transition. The unit also supports low voltage detection on the power input.
Configuration of the transmitter is performed via the USB端口 or the serial port using an intuitive Salcom programming application which allows for the setting of all operational parameters.
The 12-49 is housed in an attractive 19" x 1U rack.
Please also see the 12-49 发射机 (only) options in the 发射器 product section.
| 发射机 | |
| 模型 | 12-62-0000 VHF/UHF发射机 |
| 频率范围VHF | 148 - 164兆赫-甚高频(型号. 12-62-00150) |
| 频率范围UHF | 427.5 - 475兆赫特高频(型号. 12-62-0450) |
| 频率选择 | 用户可配置的 |
| 电力供应 | +13.8V典型(11-15 VDC范围) |
| 电力消耗 | 低功耗模式:17.5mA 马备用:40 传输:1.2A @ 4W |
| 传输能量 | 50mW, 100mW, 250mW, 500mW, 1W, 2W, 5W, 25W (25W possible via Salcom Power Amplifier) |
| 信道间隔 | 5 khz, 6.25 khz, 10kHz, 12.5 khz, 25 khz |
| 调制 | FSK与NRZ数据 |
| 偏差 | ±2.25 khz或±4.5 khz |
| 发射占空比 | 50%; Maximum 5 minutes on time |
| 波特率 | 512,1200 |
| 消息格式 | POGSAC |
| 配置十大网博靠谱平台 | 12-62配置工具 |
| 编程电缆 | 迷你USB 12-45-0000 (RJ12至DB9) Can be used with a USB to RS232 DB9 Serial Adapter Cable |
| 接收机 | |
| 频率范围 | 148-165MHz - VHF(型号. 12-84-7150) 440-480MHz - UHF(型号. 12-84-7450) Note: 80MHz to 900MHz available on request |
| 频率选择 | User configurable Note: VHF model is only adjustable by ±5MHz from (customer defined) factory preset frequency |
| 电力供应 | +13.8V typical (11 to 15 VDC range) |
| 电力消耗 | 马备用:40 Relays: 18mA per energised relay |
| 调制 | FSK与NRZ数据 |
| 接收机灵敏度 | 约- 124dbm |
| 波特率 | 512, 1200 |
| 消息格式 | POCSAG |
| 配置十大网博靠谱平台 | 12-84配置工具 |
| 编程电缆 | 12-45-0000 (RJ12至DB9) Can be used with a USB to RS232 DB9 Serial Adapter Cable |
| 串行端口 | 9600 , N, 8, 1; RS232 |
| 离散输出 | 2 Relay 联系s (1A @ 24VDc); 2 Open Collector (100mA max) Note: Not suitable for 240VAC Connections |
| 连接器 | 串行端口 (RS232) = RJ12 (6P6C) Outputs (Relay / Open Collector) = RJ45 (8C) |
| 电源连接器 | 双向插头的 & socket, screw connections (supplied) |
| 射频连接器 | 50Ω BNC (Product supplied with aerial) |
| 环境保护 | Not suitable for outdoor use and should be protected from adverse environmental conditions |
| 工作温度 | -10ºC to +50ºC (+14ºF to +122ºF) |
| 指标 | 电源指示灯(绿色) - Slow Flashing = Normal Operation - Solid (up to 5s) = Receiving Data Status LED (Red) —闪烁=错误条件 |
Salcom has further developed its range of rack systems in order to provide off-the-shelf 1U 19 inch solutions for paging and telemetry.
These racks provide a conveniently packaged selection of standard Salcom core products that can easily be added to your server rack.
The 12-49 series of transceivers/repeaters are available as VHF or UHF units with user-programmable power outputs ranging from 50 milliwatts to 5 watts, with 25W output also being a configurable option when a power amplifier is also added.
They are capable of operating as NRZ or POCSAG transmitters. The built-in POCSAG encoder can be enabled or disabled as required.
In addition to a direct/RS232 buffered serial port, an on-board USB端口 enhances the range of applications to which the transmitter can be applied. Input/Output expansion is also possible via an internal.
The USB and RS232 ports can be used to initiate paging transmissions using the Salcom proprietary protocol, 开发/宠物, TNPP, 载荷适配器.4.4.4, Ascom, Austco, Match, Gent, GPS & 脉冲计数, SMS, Scope, Comp1, Comp2 & 游戏. These ports can be used concurrently making it possible to connect a telephone interface unit and still initiate paging transmissions via the USB端口.
四个离散输入 are supported which may be used to initiate relay commands for remote control applications.
For paging applications a different pre-programmed message can be assigned to an input on high and/or low transition. The unit also supports low voltage detection on the power input.
Configuration of the transmitter is performed via the USB端口 or the serial port using an intuitive Salcom programming application which allows for the setting of all operational parameters.
The 12-49 is housed in an attractive 19" x 1U rack.
Please also see the 12-49 发射机 (only) options in the 发射器 product section.
| 发射机 | |
| 模型 | 12-62-0000 VHF/UHF发射机 |
| 频率范围VHF | 148 - 164兆赫-甚高频(型号. 12-62-00150) |
| 频率范围UHF | 427.5 - 475兆赫特高频(型号. 12-62-0450) |
| 频率选择 | 用户可配置的 |
| 电力供应 | +13.8V典型(11-15 VDC范围) |
| 电力消耗 | 低功耗模式:17.5mA 马备用:40 传输:1.2A @ 4W |
| 传输能量 | 50mW, 100mW, 250mW, 500mW, 1W, 2W, 5W, 25W (25W possible via Salcom Power Amplifier) |
| 信道间隔 | 5 khz, 6.25 khz, 10kHz, 12.5 khz, 25 khz |
| 调制 | FSK与NRZ数据 |
| 偏差 | ±2.25 khz或±4.5 khz |
| 发射占空比 | 50%; Maximum 5 minutes on time |
| 波特率 | 512,1200 |
| 消息格式 | POGSAC |
| 配置十大网博靠谱平台 | 12-62配置工具 |
| 编程电缆 | 迷你USB 12-45-0000 (RJ12至DB9) Can be used with a USB to RS232 DB9 Serial Adapter Cable |
| 接收机 | |
| 频率范围 | 148-165MHz - VHF(型号. 12-84-7150) 440-480MHz - UHF(型号. 12-84-7450) Note: 80MHz to 900MHz available on request |
| 频率选择 | User configurable Note: VHF model is only adjustable by ±5MHz from (customer defined) factory preset frequency |
| 电力供应 | +13.8V typical (11 to 15 VDC range) |
| 电力消耗 | 马备用:40 Relays: 18mA per energised relay |
| 调制 | FSK与NRZ数据 |
| 接收机灵敏度 | 约- 124dbm |
| 波特率 | 512, 1200 |
| 消息格式 | POCSAG |
| 配置十大网博靠谱平台 | 12-84配置工具 |
| 编程电缆 | 12-45-0000 (RJ12至DB9) Can be used with a USB to RS232 DB9 Serial Adapter Cable |
| 串行端口 | 9600 , N, 8, 1; RS232 |
| 离散输出 | 2 Relay 联系s (1A @ 24VDc); 2 Open Collector (100mA max) Note: Not suitable for 240VAC Connections |
| 连接器 | 串行端口 (RS232) = RJ12 (6P6C) Outputs (Relay / Open Collector) = RJ45 (8C) |
| 电源连接器 | 双向插头的 & socket, screw connections (supplied) |
| 射频连接器 | 50Ω BNC (Product supplied with aerial) |
| 环境保护 | Not suitable for outdoor use and should be protected from adverse environmental conditions |
| 工作温度 | -10ºC to +50ºC (+14ºF to +122ºF) |
| 指标 | 电源指示灯(绿色) - Slow Flashing = Normal Operation - Solid (up to 5s) = Receiving Data Status LED (Red) —闪烁=错误条件 |
